 |
|
Resilia Interlocking PVC Tiles are generally easy to clean
and compatible with normal maintenance practices.
1. Cleanup after Installation:
- Hose with plain water or wash with any normal household detergent and then let dry.
- We highly recommend OOPS as one of the best cleaners.
- Windex is useful for removing stubborn marks.
- Difficult marks can be removed with 'Toothpaste', but it must be the white type not gel.
- For Tar marks, Acetone may be used.
- However it is a solvent for PVC, and should be used carefully.
- First soak the Acetone into a cloth, and then wipe softly.
- Never pour Acetone onto tiles since it will soften the surface.
2. Initial Cleanup/Maintenance:
- Remove all debris, dust and grit by sweeping, dust mopping or vacuuming.
- Scrub the floor with a neutral pH (7–8.5) detergent.
- Apply cleaning solution with a mop.
- Scrub with a rotary scrubber with soft nylon brush or automatic scrubber with soft nylon brushes.
- Pick up remaining solution with a wet-vac or mop.
- Rinse with clean water and allow to dry.
3. Apply commercial floor finish:
Commercial and high traffic floors may have dirt or marks that are difficult
to remove. In such situations it is recommended to apply a commercial floor
finish a protective barrier and also to ease subsequent cleaning
- Apply 3 to 4 coats of high quality, commercial, acrylic floor finish.
- Apply with a clean finish mop or finish applicator.
- Allow 30 minutes dry time between each coat.
Daily or Regular Maintenance:
Use OOPS:
- We highly recommend OOPS as one of the best cleaners.
Dry Procedure:
|
